EML - настройка

Zeinov · 13 Май 2020

Привет!
Короче, у меня есть плагин EML, кто знает, тот знает.
На данный момент он у меня настроен.
Я хочу поставить себе новые заменки, которые поставил, так вот! С этими заменками был файл, в которых была настройка EML. Но просто взять и вставить это нельзя.

Что у меня есть:

vehicles.ini:

[596]                 //copcarla
mainLights.enable = 1
strobeLights.1.enable = 1
strobeLights.2.enable = 1
strobeLights.3.enable = 1
advisorLights.enable = 1
spotLight.enable = 1

mainEL.corona.number = 3    // number of coronas on each place (1-3)
mainEL.corona.space.X = 0.2
mainEL.corona.mode = 0      // 0 = normal set, 1 = alternate set, 2 = normal set without additional "environment-shine" corona
mainEL.pos.X = 0.4
mainEL.pos.Y = -0.3
mainEL.pos.Z = 0.98
mainEL.rgb1.R = 0
mainEL.rgb1.G = 0
mainEL.rgb1.B = 255
mainEL.rgb2.R = 255
mainEL.rgb2.G = 0
mainEL.rgb2.B = 0
mainEL.alpha = 190
mainEL.size = 0.35
mainEL.shadow.pos.X = 12
mainEL.shadow.size = 11
mainEL.shadow.rgb1.R = 0
mainEL.shadow.rgb1.G = 0
mainEL.shadow.rgb1.B = 60
mainEL.shadow.rgb2.R = 60
mainEL.shadow.rgb2.G = 0
mainEL.shadow.rgb2.B = 0

strobeEL.1.corona.number = 1    // number of coronas on each place (1-3)
strobeEL.1.corona.space.X = 0.05
strobeEL.1.corona.mode = 0  // 0 = normal set, 1 = alternate set, 2 = normal set without additional "environment-shine" corona
strobeEL.1.F.pos.X = -0.3
strobeEL.1.F.pos.Y = 2.7
strobeEL.1.F.pos.Z = -0.01
strobeEL.1.F.dir = 1        //1 = front, 2 = rear, 0 = both
strobeEL.1.F.size = 0.2
strobeEL.1.R.pos.X = -0.58
strobeEL.1.R.pos.Y = -1.57
strobeEL.1.R.pos.Z = 0.43
strobeEL.1.R.dir = 2        //1 = front, 2 = rear, 0 = both
strobeEL.1.R.size = 0.00
strobeEL.1.rgb1.R = 255
strobeEL.1.rgb1.G = 0
strobeEL.1.rgb1.B = 0
strobeEL.1.rgb2.R = 0
strobeEL.1.rgb2.G = 0
strobeEL.1.rgb2.B = 255
strobeEL.1.alpha = 255
strobeEL.1.shadow.F.enable = 1
strobeEL.1.shadow.F.pos.Y = 3.5
strobeEL.1.shadow.F.size = 0.6
strobeEL.1.shadow.R.enable = 0
strobeEL.1.shadow.R.pos.Y = -7.5
strobeEL.1.shadow.R.size = 0.5
strobeEL.1.shadow.rgb1.R = 80
strobeEL.1.shadow.rgb1.G = 0
strobeEL.1.shadow.rgb1.B = 0
strobeEL.1.shadow.rgb2.R = 0
strobeEL.1.shadow.rgb2.G = 0
strobeEL.1.shadow.rgb2.B = 80

strobeEL.2.corona.number = 3    // number of coronas on each place (1-3)
strobeEL.2.corona.space.X = 0.07
strobeEL.2.corona.mode = 0  // 0 = normal set, 1 = alternate set, 2 = normal set without additional "environment-shine" corona
strobeEL.2.F.pos.X = 0.5
strobeEL.2.F.pos.Y = -0.19
strobeEL.2.F.pos.Z = 0.76
strobeEL.2.F.dir = 1        //1 = front, 2 = rear, 0 = both
strobeEL.2.F.size = 0
strobeEL.2.R.pos.X = -0.8
strobeEL.2.R.pos.Y = -2.8
strobeEL.2.R.pos.Z = 0.14
strobeEL.2.R.dir = 2        //1 = front, 2 = rear, 0 = both
strobeEL.2.R.size = 0.13
strobeEL.2.rgb1.R = 255
strobeEL.2.rgb1.G = 0
strobeEL.2.rgb1.B = 0
strobeEL.2.rgb2.R = 255
strobeEL.2.rgb2.G = 0
strobeEL.2.rgb2.B = 0
strobeEL.2.alpha = 255
strobeEL.2.shadow.F.enable = 0
strobeEL.2.shadow.F.pos.Y = 7.6
strobeEL.2.shadow.F.size = 4.5
strobeEL.2.shadow.R.enable = 0
strobeEL.2.shadow.R.pos.Y = -7.5
strobeEL.2.shadow.R.size = 4.5
strobeEL.2.shadow.rgb1.R = 15
strobeEL.2.shadow.rgb1.G = 0
strobeEL.2.shadow.rgb1.B = 0
strobeEL.2.shadow.rgb2.R = 0
strobeEL.2.shadow.rgb2.G = 0
strobeEL.2.shadow.rgb2.B = 15

strobeEL.3.corona.number = 3    // number of coronas on each place (1-3)
strobeEL.3.corona.space.X = 0.01
strobeEL.3.corona.mode = 0  // 0 = normal set, 1 = alternate set, 2 = normal set without additional "environment-shine" corona
strobeEL.3.F.pos.X = 0.7
strobeEL.3.F.pos.Y = 2.6
strobeEL.3.F.pos.Z = -0.02
strobeEL.3.F.dir = 1        //1 = front, 2 = rear, 0 = both
strobeEL.3.F.size = 0.2
strobeEL.3.R.pos.X = 0.23
strobeEL.3.R.pos.Y = -2.9
strobeEL.3.R.pos.Z = 0.11
strobeEL.3.R.dir = 1        //1 = front, 2 = rear, 0 = both
strobeEL.3.R.size = 0.15
strobeEL.3.rgb1.R = 255
strobeEL.3.rgb1.G = 255
strobeEL.3.rgb1.B = 255
strobeEL.3.rgb2.R = 255
strobeEL.3.rgb2.G = 255
strobeEL.3.rgb2.B = 255
strobeEL.3.alpha = 150
strobeEL.3.shadow.F.enable = 0
strobeEL.3.shadow.F.pos.Y = 5.0
strobeEL.3.shadow.F.size = 2.1
strobeEL.3.shadow.R.enable = 0
strobeEL.3.shadow.R.pos.Y = -4.0
strobeEL.3.shadow.R.size = 0.9
strobeEL.3.shadow.rgb1.R = 30
strobeEL.3.shadow.rgb1.G = 30
strobeEL.3.shadow.rgb1.B = 30
strobeEL.3.shadow.rgb2.R = 30
strobeEL.3.shadow.rgb2.G = 30
strobeEL.3.shadow.rgb2.B = 30

advisorEL.corona.number = 3 // number of coronas on each place (1-3)
advisorEL.corona.space.X = 0.1
advisorEL.pos.Y = -0.52
advisorEL.pos.Z = 0.9
advisorEL.dir = 2       //1 = front, 2 = rear, 0 = both
advisorEL.space.X = 0.1
advisorEL.alpha = 255
advisorEL.rgb.R = 240
advisorEL.rgb.G = 166
advisorEL.rgb.B = 0
advisorEL.size = 0.06

spotLight.pos.X = -0.81
spotLight.pos.Y = 0.90
spotLight.pos.Z = 0.55
spotLight.size = 0.7

copcar.eml:

597           16
# lights here
#  id parent id  R  G  B  A   light type  corona size  shadow size  flash inertia  num switches  starting state  switching time
    1     0      FF 00 00 80       0          0.3           0            99.0            2            1          50 150
    2     0      FF FF FF 80       0          0.3           0            99.0            2            0          100 200
    3     0      FF 00 00 80       0          0.3           0            99.0            2            0          50 150
    4     0      02 90 FF 80       0          0.3           0            99.0            2            1          50 150
    5     0      FF FF FF 80       0          0.3           0            99.0            2            1          100 200
    6     0      02 90 FF 80       0          0.3           0            99.0            2            0          50 150
    7     0      FF 00 00 80       4          0.3           0            99.0            2            1          100 200
    8     0      02 90 FF 80       4          0.3           0            99.0            2            0          100 200
    9     0      FF 00 00 80       0          0.3           0            99.0            24           0          100 200 700 800 900 1000 1500 1600 1700 1800 2300 2400 2400 2450 2500 2800 3100 3400 4000 4200 4400 4600 4800 5000
    10    0      FF 00 00 80       0          0.3           0            99.0            24           0          200 300 600 700 1000 1100 1400 1500 1800 1900 2200 2300 2400 2450 2500 2800 3100 3400 4000 4200 4400 4600 4800 5000
    11    0      FF 00 00 80       0          0.3           0            99.0            24           0          300 400 500 600 1100 1200 1300 1400 1900 2000 2100 2200 2400 2450 2500 2800 3100 3400 4000 4200 4400 4600 4800 5000
    12    0      02 90 FF 80       0          0.3           0            99.0            24           0          300 400 500 600 1100 1200 1300 1400 1900 2000 2100 2200 2400 2450 2800 3100 3400 3700 4000 4200 4400 4600 4800 5000
    13    0      02 90 FF 80       0          0.3           1            99.0            24           0          200 300 600 700 1000 1100 1400 1500 1800 1900 2200 2300 2400 2450 2800 3100 3400 3700 4000 4200 4400 4600 4800 5000
    14    0      02 90 FF 80       0          0.3           1            99.0            24           0          100 200 700 800 900 1000 1500 1600 1700 1800 2300 2400 2400 2450 2800 3100 3400 3700 4000 4200 4400 4600 4800 5000
    15    0      02 90 FF 80       0          0.3           1            99.0            2            0          50 150
    16    0      02 90 FF 80       0          0.3           1            99.0            2            1          50 150

Help, please!

Поиск

Поиск

EML - настройка

Zeinov

Новичок

Похожие темы